AC 2 Prong Power Cord 5ft
4.7Editor score
Five-foot cable length
Figure-eight C7 connector
Thickened PVC construction
Wide household-device support
In this guide
A damaged or missing console power cable can interrupt a game session, but choosing a replacement requires more than matching the plug shape. The best PS4 replacement power adapter cable must also match the console model, power-supply connector, electrical rating, and installation space. This guide compares figure-eight and three-slot alternatives alongside specialized PlayStation VR power solutions.
The products were evaluated using the supplied specifications, including connector standards, wire gauge, supported Sony and Microsoft models, length, safety certification, and stated construction features. The list covers standard PS4 Slim connections, older PS4 Pro adapters, multi-console cords, and a dedicated PSVR power unit so readers can distinguish a simple cable from a full AC adapter.
Each review identifies the strongest feature and any meaningful limitation, including model exclusions. The top selections represent the most practical balance of compatibility, value, and convenience, although ratings and availability can change. Always verify the connector on the original power supply and compare the cable specifications before ordering a replacement.
Top 3 Picks for Best PS4 Replacement Power Adapter Cable
Superer AC Power Cord Cable
4.7Editor score
ETL-certified construction
Broad console compatibility
Four-foot cord length
24-month manufacturer warranty
Sony PS4 PS5 Power Cord 2 Prong
4.9Editor score
Six-foot cord length
UL-certified construction
Broad device compatibility
Seven-amp rated wiring
Top 10 Best PS4 Replacement Power Adapter Cable in 2026 Compared
The table below compares connector type, supported hardware, length, and notable construction or safety features. Because PS4 consoles use more than one power connection, the correct replacement depends on whether your system is a Slim model, an older PS4 Pro, or a dedicated VR processor unit.
ProductsSpecificationsEditor scorePrice
Editor's Choice
Superer AC Power Cord Cable
IEC C7 figure-eight
Four-foot length
ETL certified
125V, 7A rating
4.7Editor score
Editor's Choice
AC 2 Prong Power Cord 5ft
IEC C7 figure-eight
Five-foot length
18 AWG wiring
Thickened PVC jacket
4.7Editor score
Best Premium
AC Power Cord for PS4 Pro
IEC C17 three-slot
Six-foot length
UL listed
125V, 10A rating
4.7Editor score
Mustpoint PS4 Power Connector
Four-pin connector
ADP-240CR compatibility
CUH-1115A compatibility
65mm specification
3.8Editor score
TPLTECH AC Power Cord
IEC C7 figure-eight
125V, 7A rating
UL listed
18 AWG wiring
4.8Editor score
12V 3A PSVR AC Adapter
DC 12V output
3A current rating
36W total output
Universal AC input
4.8Editor score
PS5 Xbox Two-Pack Power Cord
IEC C7 figure-eight
Two five-foot cords
18 AWG wiring
Multi-device compatibility
4.8Editor score
Sony PS4 PS5 Power Cord
IEC C7 figure-eight
Six-foot length
UL certified
125V, 7A rating
4.9Editor score
Superer TV Power Cord Cable
IEC C7 figure-eight
Six-foot length
ETL certified
125V, 7A rating
4.7Editor score
UL Listed PS4 Pro Cord
IEC C17 three-slot
Four-foot length
UL listed
125V, 10A rating
4.7Editor score
1. Superer AC Power Cord Cable – Broad Compatibility with Added Assurance
Superer AC Power Cord Cable
IEC C7 figure-eight
Four-foot length
ETL certified
125V, 7A rating
The Superer AC Power Cord Cable is a broadly compatible figure-eight replacement with a 4.7 rating, and it stands out for a clear combination of ETL certification, a pure copper core, and a 24-month manufacturer warranty. Its four-foot length is sufficient for many entertainment centers, although it may be less convenient when the wall outlet is far from the console.
Pros
- Supports numerous console models
- Includes a manufacturer warranty
- Uses a pure copper core
- ETL safety certification
- Also serves household electronics
Cons
- Excludes PS4 Pro models
- Shorter four-foot length
We may earn a commission when you buy through this link, at no additional cost to you.
Compatibility is the main attraction. The cable is listed for Sony PS5, PS5 Slim, PS4, PS4 Slim, PS3 Slim, and PS3 Super Slim systems. It also supports Xbox Original, Xbox One S, Xbox One X, Xbox Series S, and Xbox Series X, along with TVs, printers, speakers, and monitors that accept the same two-prong figure-eight connection. That makes it useful for consolidating a collection of compatible household electronics.
There are explicit boundaries that shoppers should not overlook. The manufacturer states that the cable is not compatible with PS1, PS2, original fat PS3, PS4 Pro, original Xbox One, or Xbox 360 Core, Pro, Elite, Slim, and E models. The exclusion of PS4 Pro is especially relevant because some original Xbox and PS4 Pro power bricks use the three-slot C17 connection rather than the two-slot C7 figure-eight connector.
This is a strong general replacement for PS4 Slim owners and anyone who wants one certified cable for several compatible devices. Check the shape of the socket on the console power brick before buying, because visual similarity alone is not enough when C7 and C17 connectors are involved. With compatibility confirmed, the warranty and certification make it an especially reassuring daily-use option.
One Cord for Several Devices
The broad device support reduces the need to keep separate cords for every console or compatible television. Its non-polarized two-prong wall plug also makes placement near standard US outlets straightforward.
Safety and Durability Details
ETL certification, an 18 AWG conductor, and a stated maximum load of 7A at 125V AC provide useful context for safe operation. The pure copper core is also designed to support stable power delivery and routine durability.
We may earn a commission when you buy through this link, at no additional cost to you.
2. AC 2 Prong Power Cord 5ft – Flexible Value for Standard Console Connections
AC 2 Prong Power Cord 5ft
IEC C7 figure-eight
Five-foot length
18 AWG wiring
Thickened PVC jacket
This five-foot AC power cord combines a 4.7 rating with straightforward figure-eight compatibility, making it a practical budget-oriented replacement for standard Sony and Microsoft console power supplies. Its extra length compared with many stock-style cords can improve placement around desks and entertainment cabinets without creating an unwieldy cable.
Pros
- Five-foot length offers flexibility
- Supports several console families
- Thickened PVC resists bending
- Copper-core construction
- Works with many household devices
Cons
- Original fat PS3 excluded
- No stated safety certification
We may earn a commission when you buy through this link, at no additional cost to you.
The specified compatibility includes PS5, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, Xbox One S, Xbox One X, Xbox Series S, and Xbox Series X. Its IEC320 C7-to-NEMA 1-15P configuration also works with game consoles, LED and LCD televisions, monitors, sound bars, printers, and other equipment designed for a two-slot figure-eight power cord.
Construction details support its value positioning. The cable uses 18 AWG wire with a copper core and a thickened PVC jacket. The manufacturer also reports that it passed more than 1,000 bending tests and highlights tensile resistance as part of its expected service life. These are manufacturer-provided statements rather than independent test results, but they indicate the intended durability focus.
The important limitation is that the original fat PS3 is explicitly excluded, and the supplied information does not identify a UL or ETL listing for this model. It also remains a two-slot C7 cable, so it should not be selected for equipment requiring the three-slot C17 connection. For PS4 Slim and other supported systems, it offers a helpful balance of reach, construction, and everyday utility.
Useful Extra Reach
The five-foot length gives you more flexibility than a short three-foot cord when the outlet sits behind a television stand or beside a wall. It remains manageable for storage and routine cable management.
Durability-Focused Construction
A thickened PVC jacket and a reported 1,000-plus bending-test result suggest attention to repeated handling. The 18 AWG copper-core construction aligns with the demands of common household entertainment equipment.
We may earn a commission when you buy through this link, at no additional cost to you.
3. AC Power Cord for PS4 Pro – Certified Support for Older Power Bricks
AC Power Cord for PS4 Pro
IEC C17 three-slot
Six-foot length
UL listed
125V, 10A rating
This UL-listed power cord is a six-foot replacement for PS4 Pro CUH-7015 and CUH-7115 systems and several original Xbox power bricks. Its 4.7 rating and three-slot IEC320 C17 connector distinguish it from the figure-eight cables that fit PS4 Slim. It is specifically aimed at owners of older console hardware whose original cords have worn out.
Pros
- Targets older PS4 Pro models
- UL-listed electrical construction
- Six-foot length improves reach
- Supports several Xbox bricks
- Ten-amp stated rating
Cons
- Excludes CUH-7200 series
- Not for standard C7 consoles
We may earn a commission when you buy through this link, at no additional cost to you.
Beyond the PS4 Pro models, the manufacturer lists support for power supply bricks used with Original Xbox One, Xbox 360 E, Xbox 360 Elite, Xbox 360 Slim, and Xbox 360 Arcade systems. The electrical specification is 18 AWG, 10A at 125V, with a two-prong NEMA 1-15P wall plug. UL listing is the standout credential in the supplied specifications.
The most consequential exclusion is the PS4 Pro CUH-7200 series. Later units in that numbering range use a different arrangement, so buyers must identify the correct model before ordering. This cord also should not be confused with a two-slot figure-eight cable, because its C17 connector has a three-slot, kidney-shaped profile.
Choose this option when you have an older PS4 Pro or compatible Xbox power brick and want a longer, UL-listed cord with a 10A rating. It is less versatile for a mixed household device collection because standard C7 appliances will not fit. Confirming the console model and examining the original power-brick socket is essential before purchase.
A Correct Match for C17
The IEC320 C17 configuration supplies the three-slot kidney-shaped connector needed by the listed older PS4 Pro and Xbox power bricks. This targeted design prevents confusion with the two-slot C7 figure-eight alternatives.
UL-Listed and Six Feet Long
UL listing provides a documented safety credential, while the six-foot length gives more flexibility around furniture. Its 18 AWG conductors are rated by the manufacturer for up to 10A at 125V.
We may earn a commission when you buy through this link, at no additional cost to you.
4. Mustpoint PS4 Power Connector – Narrow Replacement for Specific PS4 Models
Mustpoint PS4 Power Connector
Four-pin connector
ADP-240CR compatibility
CUH-1115A compatibility
65mm specification
The Mustpoint Power Supply Cable Connector is a specialized four-pin replacement for Sony PS4 CUH-1115A systems using the ADP-240CR 65mm power supply arrangement. Its 3.8 rating is lower than the other products in this guide, but the category is far narrower: it is intended for a particular console connection rather than serving as a general AC cord.
Pros
- Built for PS4 hardware
- Targets named model numbers
- Potentially repairs a damaged terminal
- Compact specialized connector
Cons
- Lower 3.8 product rating
- Very limited device compatibility
- Requires model-specific identification
We may earn a commission when you buy through this link, at no additional cost to you.
The package contains one power-supply cable connector, and the supplied specifications emphasize compatibility only with Sony PlayStation 4 hardware. That makes it potentially useful when the original cord has a damaged console-end terminal but the power brick and wall-side wiring remain serviceable. It can also serve as a dedicated replacement part for a matching PS4 setup.
This is not a universal PS4 power cord. It does not have the characteristics of a standard two-prong figure-eight cable, and the product data does not establish compatibility with PS4 Slim, PS5, Xbox systems, televisions, or other household electronics. Buyers also need to distinguish the CUH-1115A designation from similar-looking console models and power supplies.
The right buyer is someone who has already confirmed the console model and power-supply type and needs this exact four-pin part. For almost everyone seeking a straightforward replacement cable, one of the C7 or C17 options will be easier to identify and use. The Mustpoint is best viewed as a model-specific repair component rather than a general gaming accessory.
Model-Specific Repair Solution
The connector is tied to CUH-1115A and ADP-240CR 65mm hardware, giving it a clear purpose within one PS4 power-supply family. That specificity can be advantageous when the existing cable needs only its console-end repair.
Confirm Every Identifying Mark
Because compatibility is limited, verify the console model, power-brick label, and connector dimensions before buying. Similar PS4 models can use different power arrangements, and appearance alone may not reveal the distinction.
We may earn a commission when you buy through this link, at no additional cost to you.
5. TPLTECH AC Power Cord – Premium Certification and Versatile Compatibility
TPLTECH AC Power Cord
IEC C7 figure-eight
125V, 7A rating
UL listed
18 AWG wiring
The TPLTECH AC Power Cord is a highly rated figure-eight replacement with a 4.8 score, UL listing, and compatibility across current and older slim-style PlayStation and Xbox systems. It is a particularly attractive option for buyers who want a certified cord for a PS4 Slim while keeping another compatible device on hand.
Pros
- High 4.8 product rating
- UL safety listing
- Supports many console families
- Pure copper construction
- Works with many household devices
Cons
- PS4 Pro compatibility unstated
- Length is not specified
We may earn a commission when you buy through this link, at no additional cost to you.
The listed console support covers PS5, PS5 Slim, PS5 Pro, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X. The same C7 figure-eight configuration also works with TVs, printers, speakers, and other devices using that connector. That makes the cable more versatile than a console-specific replacement.
Its construction is described as a pure copper wire core within a heavy-duty, flame-retardant jacket intended to resist bending and daily wear. The electrical specification is 18 AWG, 125V, and up to 7A. UL testing and certification are the strongest supplied selling points because they give shoppers a recognized safety credential.
The product data does not specify a cable length, so buyers should consult the listing images and dimensions before ordering. It also does not expressly claim support for the PS4 Pro, even though some PS4 Pro models use the same C7 approach as standard PS4 units. The safest approach is to verify the socket on the original power supply. If it is a two-slot C7 connection, this is a strong certified choice.
Recognized Safety Certification
UL listing is a meaningful advantage for a cable intended for daily use around valuable electronics. The stated OSHA authorization is presented as part of the product's safety certification.
A Shared Household Connection
Supporting both major console ecosystems and other two-slot appliances means one replacement can serve several setups. Its non-polarized design also simplifies plugging into a standard US wall receptacle.
We may earn a commission when you buy through this link, at no additional cost to you.
6. 12V 3A PSVR AC Adapter – Complete Power Solution for VR
12V 3A PSVR AC Adapter
DC 12V output
3A current rating
36W total output
Universal AC input
This 12V 3A AC adapter is a complete power-supply replacement for the processor units used with PlayStation VR, PS4 PSVR, and PSVR2. Unlike the simple AC cords elsewhere in the guide, it converts household AC power into regulated 12V DC, making it a better match for VR equipment with an inline power brick.
Pros
- Complete AC-to-DC replacement
- Matches common PSVR output
- Built-in electrical protections
- Supports 100-240V input
- Works with several Sony devices
Cons
- Not a standard PS4 cord
- Requires matching 12V 3A devices
We may earn a commission when you buy through this link, at no additional cost to you.
Its input accepts 100-240V AC at 50/60Hz, while the output is 12V DC at 3A, equivalent to 36W. The stated replacement references include CUH-ZAC1, ADP-36NH A, CUH-ZVR2, CUH-ZVR1, and SQN36W12P-04. The product is also described as suitable for certain Sony wireless headphones and 4K Blu-ray players that require the same output.
Built-in protection against over-voltage, over-current, and short circuits is a notable feature. The stable 36W output is intended to avoid power drops during extended VR sessions or movie viewing. The product data emphasizes a straightforward setup, although users should still follow the applicable device instructions and identify the correct low-voltage connector.
This adapter is not the right purchase for a console's standard wall-side AC cord, and its 12V 3A requirement limits it to compatible equipment. It is best for a PSVR owner whose original adapter has failed and who wants a replacement supplying the correct regulated output. Verify both the voltage, current, and connector before ordering.
Regulated Low-Voltage Output
Unlike a passive AC cord, this unit actively transforms standard wall power into 12V DC at 3A. That makes it appropriate for PSVR processor hardware and other compatible Sony accessories with matching requirements.
Protection for Extended Sessions
Over-voltage, over-current, and short-circuit protection are built into the design. The advertised stable output targets dependable operation during long gaming sessions and extended movie viewing.
We may earn a commission when you buy through this link, at no additional cost to you.
7. PS5 Xbox Two-Pack Power Cord – Convenient Backup for Multi-Device Areas
PS5 Xbox Two-Pack Power Cord
IEC C7 figure-eight
Two five-foot cords
18 AWG wiring
Multi-device compatibility
The PS5 Xbox Two-Pack Power Cord includes two five-foot figure-eight cables, making it a convenient choice for households with more than one compatible console or appliance. Its 4.8 rating and broad PS5, PS4 Slim, PS3 Slim, and modern Xbox support make the package especially practical for shared gaming rooms.
Pros
- Includes two complete cords
- Five-foot length for flexibility
- Supports PS and Xbox systems
- Reinforced 18 AWG construction
- Useful as a household backup
Cons
- Original fat PS3 excluded
- Original Xbox One excluded
We may earn a commission when you buy through this link, at no additional cost to you.
Each cable uses the IEC320 C7-to-NEMA 1-15P two-prong configuration and reinforced 18 AWG materials. The product data says the cords were tested for thousands of bends and are intended to provide stable power without overheating. The two-cord format allows one to remain connected while the other serves as a spare, travels with a second setup, or powers a compatible television or sound bar.
Compatibility exclusions are clear. The original fat PS3 is not supported, and the original Xbox One console requires its own power-supply brick rather than this direct figure-eight connection. The package is therefore ideal for modern two-slot devices but not a universal solution for every historical console generation.
Choose this product when a spare cable is just as valuable as the primary replacement. Two included five-foot cords reduce the inconvenience of unplugging one device to move a cable around, and the extra unit is useful for travel or another room. Confirm that each appliance uses the two-slot connector, then place one cord where it is easy to reach and reserve the other as a serviceable backup.
Two Cords, More Flexibility
A two-pack prevents constant swapping when a second compatible console or household device needs power. Each five-foot cord also provides enough reach for many entertainment-center layouts.
Designed for Repeated Handling
Reinforced 18 AWG construction and a stated thousands-of-bends test emphasize daily-use durability. The non-polarized design makes the wall-side plug simple to position in standard US outlets.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Sony PS4 PS5 Power Cord – Extended Reach with Strong Certification
Sony PS4 PS5 Power Cord
IEC C7 figure-eight
Six-foot length
UL certified
125V, 7A rating
This six-foot two-prong power cord has the highest rating in the group at 4.9 and combines UL certification with broad console and household-device compatibility. It is a particularly strong fit for PS4 Slim owners whose wall outlet is farther away than a short stock-style cable can comfortably reach.
Pros
- Highest product rating
- Six-foot extended reach
- UL-certified construction
- Supports numerous device types
- Copper two-conductor wiring
Cons
- Brand naming is generic
- PS4 Pro compatibility unstated
We may earn a commission when you buy through this link, at no additional cost to you.
The product is listed for PS5, PS5 Slim, PS5 Pro, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X. It also works with devices from Canon, Epson, HP Officejet, Frigidaire, and Insignia when they use the same figure-eight input. That wide support makes it useful as a shared cable across a mixed household.
Its two-conductor copper wiring is specified as 18 AWG, with a 7A capacity at 125V and 50-60Hz operation. UL certification is listed under file number E484264. The manufacturer also explains that the non-polarized NEMA 1-15P wall plug requires no transformer or adapter for compatible US-voltage devices.
The six-foot length distinguishes it from many three- or four-foot alternatives, providing better reach behind entertainment centers, desks, and counters. PS4 Pro compatibility is not expressly stated, however, and model-specific connector differences remain important. If your PS4 uses a two-slot C7 figure-eight power socket, this is an excellent certified option with generous reach.
Six Feet of Practical Reach
The extended length helps route power around furniture and toward outlets that may sit behind an entertainment center. It offers enough slack for tidier cable management without approaching the length of a dedicated extension lead.
Verified Safety and Capacity
UL certification and a stated file number provide a traceable safety credential. The 18 AWG two-conductor copper construction is rated for 125V and up to 7A for compatible devices.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Superer TV Power Cord Cable – Extended Certified Cord for Mixed Households
Superer TV Power Cord Cable
IEC C7 figure-eight
Six-foot length
ETL certified
125V, 7A rating
The Superer TV Power Cord Cable is a six-foot, ETL-certified figure-eight replacement intended for a broad mix of game consoles and televisions. With a 4.7 rating and a 24-month manufacturer warranty, it is an appealing option for a shared media setup in which one cable must support several brands and devices.
Pros
- Six-foot length for flexible placement
- ETL-certified construction
- Supports many television brands
- Works with modern console families
- Includes manufacturer warranty
Cons
- PS4 Pro explicitly excluded
- Some older systems incompatible
We may earn a commission when you buy through this link, at no additional cost to you.
Console compatibility includes PS5, PS5 Slim, PS4, PS4 Slim, PS3 Slim, and PS3 Super Slim. The television list includes Samsung, LG, Hisense, TCL, Sony, Apple, Insignia, Sharp, Panasonic, Toshiba, JVC, and Roku smart LED, LCD, and HD televisions, assuming each uses the matching power port. Printers, speakers, and monitors are also included in the stated applications.
The electrical specification is an 18 AWG IEC 60320 C7-to-NEMA 1-15P non-polarized cord rated for 125V AC and 7A maximum. The pure copper core and ETL certification support stable delivery and safe daily use. The six-foot length gives more freedom than a compact cord when a television cabinet sits away from the nearest outlet.
The manufacturer explicitly excludes PS1, PS2, original fat PS3, PS4 Pro, original Xbox One, and Xbox 360 Core, Pro, Elite, Slim, and E models. That broad television compatibility does not erase console connector differences. Confirm that the device accepts the two-slot figure-eight cord, then this six-foot Superer model is a practical certified choice.
One Cord Across Media Brands
Support for numerous television manufacturers makes the cable useful beyond gaming hardware. It can simplify replacements across a mixed room containing consoles, televisions, speakers, and compatible displays.
Length, Certification, and Warranty
The six-foot cable balances reach with manageable storage. ETL certification and a 24-month manufacturer warranty add assurance beyond the basic electrical specifications.
We may earn a commission when you buy through this link, at no additional cost to you.
10. UL Listed PS4 Pro Cord – Compact Certified Choice for C17 Devices
UL Listed PS4 Pro Cord
IEC C17 three-slot
Four-foot length
UL listed
125V, 10A rating
The UL Listed PS4 Pro Cord is a compact four-foot replacement for older PS4 Pro CUH-7015 and CUH-7115 models and compatible Xbox power bricks. Its 4.7 rating reflects a straightforward product whose main advantages are UL listing, a 10A capacity, and compatibility with the less common three-slot connector.
Pros
- Compact four-foot length
- UL-listed safety status
- Supports older PS4 Pro models
- Works with selected Xbox bricks
- Ten-amp stated capacity
Cons
- Excludes CUH-7200 series
- Not compatible with C7 devices
We may earn a commission when you buy through this link, at no additional cost to you.
The cable is specified as 18 AWG, 125V, and 10A, with an IEC320 C17 connector and a two-prong NEMA 1-15P wall plug. Listed applications include power supply bricks for Original Xbox One, Xbox 360 E, Xbox 360 Elite, Xbox 360 Slim, and Xbox 360 Arcade systems. One power cord is included in the package.
As with the longer C17 alternative, the CUH-7200 series is explicitly excluded. This matters because buyers may assume all PS4 Pro systems use an identical connector. The safest process is to check the console model number and inspect the socket on the original power brick rather than relying on the broad PS4 Pro label alone.
This cord is best for a confirmed older PS4 Pro or listed Xbox brick where a shorter four-foot cable is preferable. It cannot replace a PS4 Slim figure-eight cord, so it offers less household versatility than the C7 products. Once connector compatibility is established, its UL listing and 10A specification make it a solid targeted replacement.
Targeted Older-Hardware Support
The cord focuses on named PS4 Pro generations and specific Xbox power bricks. This reduces compatibility ambiguity once the original hardware model has been confirmed.
Compact Certified Design
At four feet, the cable is shorter and easier to conceal than the six-foot C17 option. UL listing and a stated 10A capacity support its use as a daily replacement for compatible equipment.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best PS4 Replacement Power Adapter Cable
The decisive factor is not the keyword alone but the exact power connection used by your PS4 model and power supply. Connector type, electrical rating, length, safety credentials, and intended device should be checked before selecting a replacement.
Identify the Console Connector
PS4 hardware does not use one universal power-cord connection across every generation. Standard PS4 and PS4 Slim systems commonly use a two-slot figure-eight IEC C7 connection, while some older PS4 Pro models use the three-slot kidney-shaped IEC C17 connector. The CUH-7015 and CUH-7115 PS4 Pro models are listed as compatible with the C17 choices in this guide, but CUH-7200 systems are expressly excluded. Look at the original cable rather than assuming every console sharing the PS4 name has the same socket.
Distinguish Cables from AC Adapters
A standard console cord carries AC directly from the wall to the console's built-in or attached power supply. By contrast, a PSVR adapter converts wall AC into regulated 12V DC for a processor unit or other compatible low-voltage accessory. The Mustpoint product is a third type: a four-pin console-end connector for a very specific PS4 model and power-supply arrangement. Choosing the wrong category may leave you with a cable that cannot connect at all.
Check Wire Gauge and Ratings
Most figure-eight replacements in this guide use 18 AWG conductors and are rated for 125V at up to 7A. The two C17 options also use 18 AWG but state a 10A maximum at 125V. The dedicated PSVR adapter takes 100-240V AC input and produces 12V DC at 3A, or 36W. These figures should match the requirements of the power supply being connected, and they are not interchangeable across connector or output types.
Review Safety Certifications
For a cable used every day around expensive electronics, a recognized certification is a meaningful buying criterion. Five products in this list specify UL or ETL certification, including file information for the six-foot Sony PS4 PS5 cord. Certification does not make an incompatible cable suitable, but it provides additional assurance regarding the product's tested construction. Where no certification is stated, consider the manufacturer's details and the quality of the specifications more carefully.
Select the Right Length
Length matters most when an outlet is behind a television stand, beneath a desk, or far from the console location. Four-foot cables are compact and easy to conceal, five-foot cords offer additional reach, and six-foot models provide the most placement flexibility among the general-purpose choices in this guide. A longer cord should still be routed carefully so it does not create a trip hazard or become difficult to manage behind furniture.
Consider Multi-Device Use
A non-polarized C7 cord may serve more than one console and can also fit compatible televisions, printers, speakers, monitors, projectors, and small appliances. This makes it valuable for a household that wants one replacement cable to cover several positions. A dedicated C7, C17, four-pin connector, or PSVR adapter is less general, but that focused design may be exactly what a specific device requires.
Read Model Exclusions Carefully
Model exclusions are not minor footnotes. Original PS3, PS4 Pro, original Xbox One, and several Xbox 360 families can use different power connections. Within the PS4 Pro line, CUH-7015 and CUH-7115 are listed for the C17 cords, while CUH-7200 is not. Always compare the replacement listing with the model number printed on your console or power brick, and examine the connector if the listing contains multiple visual options.
Evaluate Practical Extras
Length options, warranty coverage, bending resistance, and included quantities can help distinguish otherwise similar cables. A two-pack is valuable for backup or multi-device arrangements, while a warranty adds reassurance for a long-term household purchase. These extras should support—not replace—the basic compatibility check, because a cord with an excellent warranty is still unsuitable if its connector does not match.
How to Use and Care for Your PS4 Replacement Power Adapter Cable
Before installation, turn off and unplug the console, disconnect the old cable, and compare the replacement's console-side connector with the socket on the original power supply. Confirm that the model number on the console is included in the cable or adapter listing. A C7 figure-eight plug has two blade slots, while a C17 plug has three, so checking the shape prevents forced or incorrect insertion.
Route the cable behind furniture or along a wall where it will not be pinched, stepped on, or pulled by children and pets. Connect the console-side plug fully without forcing it, then plug the wall-side cord into a grounded outlet. For a PSVR adapter, verify the 12V and 3A output plus the low-voltage connector before use, and follow the equipment manufacturer's instructions regarding proper VR setup and shutdown.
Inspect the cable periodically for exposed conductors, damaged insulation, discoloration, loose plugs, or sharp bends. Unplug it if you notice heat, flickering, a burning smell, or unstable power. Avoid wrapping the cable tightly around the original adapter or using it as a pull handle. Store longer cords loosely in a dry location so the jacket and connectors remain protected between uses.
Frequently Asked Questions
What kind of power cord does a standard PS4 Slim use?
The standard PS4 Slim generally uses a two-slot figure-eight IEC C7 power cord that connects to a NEMA 1-15P wall plug. The console-end shape is small and resembles a figure eight. Because several unrelated devices use the same connector, the cord's broader compatibility list does not guarantee support for every PS4 model. Check the original power supply and console model before purchasing.
Can I use a figure-eight cord on a PS4 Pro?
It depends on the PS4 Pro model and its power brick. The C7 figure-eight choices in this guide generally do not claim PS4 Pro compatibility, while the C17 cables target older CUH-7015 and CUH-7115 models. The CUH-7200 series is expressly excluded from those C17 listings. Identify the exact model printed on the console and inspect the original connector before choosing.
What is the difference between an IEC C7 and IEC C17 connector?
An IEC C7 connector has two parallel blade slots and creates a compact figure-eight shape. An IEC C17 connector has three blade slots in a larger kidney-shaped profile. These are physically different connections and should not be forced together. The replacement cable must match the socket on the console's power supply rather than merely resemble the original cable from a distance.
Is the 12V 3A PSVR adapter a replacement for the normal PS4 cord?
No. The 12V 3A PSVR adapter converts AC wall power into regulated DC output for compatible PlayStation VR processor units and selected Sony accessories. A standard PS4 or PS4 Slim cord simply carries AC power to the console's designated power supply. Choose the PSVR adapter only when the original equipment calls for a 12V, 3A adapter and the low-voltage connector matches.
Can one replacement cord work with both PlayStation and Xbox?
Many two-slot C7 cables in this guide support both modern PlayStation and Xbox models that use the same figure-eight connection. Compatibility still depends on the exact console version and power-supply design. Original Xbox One, Xbox 360 variants, and some other older systems require different connections or brick arrangements. Review the exclusions and confirm the socket before relying on a cross-platform cord.
Does a UL or ETL listed power cord guarantee compatibility?
No. Safety certification concerns the tested construction of the listed product, not whether it fits your console. A certified C7 cable still cannot connect to a C17 socket, and a C17 cable will not fit a two-slot figure-eight inlet. Use certification as a quality and safety factor alongside connector shape, model numbers, electrical specifications, and the original power supply.
How long should a PS4 replacement power cord be?
Four feet works well for close wall connections and tidy setups, while five- or six-foot cables provide more freedom when the outlet sits behind an entertainment center or desk. Measure the intended route before ordering. Choose the shortest length that reaches comfortably and can be secured without creating a trip hazard or sharp pull at the plug.
What should I do if the new cord does not fit?
Do not force either connector. Disconnect the cable and check whether the original power supply uses a two-slot C7 or three-slot C17 connection. Also verify the console model and any power-brick part number. If the listing offers multiple connector or length variations, confirm the selected option against the product images before purchasing.
Final Thoughts on Choosing the Best PS4 Replacement Power Adapter Cable
The Superer AC Power Cord Cable is the most balanced all-around choice, combining ETL certification, broad support for compatible PS4 and PS5 systems, a pure copper core, and a manufacturer warranty. The five-foot AC 2 Prong Power Cord offers an efficient option for standard figure-eight connections, while the six-foot Sony PS4 PS5 Power Cord stands out for its high rating, UL certification, and generous reach.
For unusual hardware, compatibility is more important than general convenience. The C17 cords suit confirmed older PS4 Pro and Xbox power-brick systems, the Mustpoint connector serves a narrowly defined four-pin repair need, and the 12V 3A PSVR adapter replaces low-voltage VR equipment rather than a normal console cord. Prioritize the exact connector and model number before considering length or extra features.
Ratings, product availability, and pricing can change over time, so check the current listing before making a final decision. Compare the supplied dimensions, connector standards, certification details, and compatibility exclusions with your original PS4 power supply, then choose the replacement that offers the most reliable fit for the way you actually use your gaming setup.